Double Glazing Door Lock Repairs
Are you experiencing issues with your uPVC door or window mechanism broken? Maybe the handles on your uPVC windows and doors are not aligned properly or are difficult to use.
You'll be wasting energy when your double-glazed doors do not function properly. This also increases the risk of burglary. Owen the Locksmith can fix your door lock for a reasonable price.
Snapped Key
If a key breaks within the lock, it can be incredibly difficult. It can also be a security problem in that it can make you vulnerable to a burglar if the door does not lock. Fortunately, there are some simple fixes you can attempt to fix the issue and get your door working properly once more.
Remember to remain calm. If you panic and begin doing a lot of fumbling around you may end up pushing the damaged piece of the key even further into the lock, thereby making the situation even more difficult.
Spray WD-40 or another penetrating lubricant, into the lock. This will allow the broken piece come out more easily. You can also make use of a screwdriver to break pieces that might be blocking the way. If you're lucky enough to have a little bit of the key left sticking out and you want to remove it, make use of a paperclip or other thin metal object to grab it and pull it out. Both of these methods work well, but be very careful not to push the broken piece of the key deeper into the keyway.
Some paperclips come with grooved edges that can be used as hook extractors. Jigsaw blades can also work well for this. If you don't have any of these items you can bend a hook using needle-nosed pliers. You can also make use of a pair of tweezers to grasp and pull out the last bit of the broken keys.
If you are unable to remove the broken key piece then you can use a lock deicer. It's available at most hardware stores and is used to freeze any moisture that may be present in the lock.
If none of these strategies appear to be working, it might be the time to contact locksmith. Fitlocks experts can quickly resolve issues with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also reconfigure double glazing door mechanisms to ensure that they are simpler to operate. Get a double glazing repair through us online or give us a call to discuss your needs.
Broken Cylinder
A damaged cylinder could pose a major security risk. A professional locksmith is able to fix the cylinder. To fix the cylinder locksmiths will need to tap it. They can do this with a hammer or other tool, but the best method is to use an extended match or piece of wire. Then, place the match's end or wire close to the keyway. The locksmith can then strike the lock in order to crack it. This is superior to using a hammer, which can cause damage to the lock.
The most frequent cause for cracks in the head of a cylinder is due to overheating. This can occur when the block and cylinder head are made of various metals such as cast-iron and aluminium. Different metals will be heated and cool at different rates. This can cause localised hotspots to expand more quickly than the rest of the cylinder.
Another possible cause for cylinder cracks is corrosion. If the head and block of a cylinder are not maintained correctly, they can rust or corrode, which can cause them to expand more than they would normally. As time passes, this may cause cracks.
If your uPVC door or window lock is stiff or requires lots of pressure to turn, this can be caused by a number of things. This issue could result from a defective locking mechanism, or misalignment and also a worn out handle.
Fortunately it's a simple and cost-effective fix for the majority of homeowners of double glazing. A professional locksmith will usually be able to solve this issue within a matter of hours of arriving at your home. They can repair the locking mechanisms, or change the window handles and change the gearboxes based on your specific needs. A locksmith with experience can always advise you on the most cost-effective solutions for your home. They can even recommend upgrades to 3 Star security Euro cylinders, TS007, that will provide an extra layer of security against burglars. This is a small cost to pay for the security that comes with knowing your uPVC doors are secure.
Broken Handle
Window handle locks are complex mechanisms that become less effective with time and use, so it's no surprise that they sometimes break. It isn't always easy to pinpoint the reason behind the problem and fix it correctly.
If the issue is related to the locking mechanism inside or the latch, repairing your broken handle will improve your uPVC double glazing door's security as well as help you to stop drafts. It could be costly to repair or replace the handle in a way that isn't done correctly. It can also harm the frame and lock of your door.
Screwdriver: With the window open and the screw loose, loosen the handle. The screw should be on the inside of the backplate. It is typically concealed by a screw cap for aesthetic reasons. You should not lose any internal components of the handle like the plates and levers on either side. Keep them in the same order so that it is simpler to replace them in the event of a need.
Then, rotate the handle until it's 90 degrees to the window frame and loosen the screw on the back of the handle that fixes it to the internal spindle with another screwdriver. Once the screw is removed, you should be in a position to pull the handle off and pull out the broken spindle. Replace it with a brand new one, ensuring it's the same length as the previous one (you can typically find these online or in hardware stores) and then securely screw it into the right place. Do not tighten the screw too much as this could harm the handle as well as the window frame.
Close the handle and test it. It is likely that it will operate smoothly and you'll be able open your window again.
Don't forget to double-check that your uPVC window is shut properly when you're working with the handle. If they aren't closing properly, you could experience damp or draughts in your home. Also, you could be compromising the energy efficiency of your home. double glazing repair near me , such as Core Sash Windows, will be able to adjust the hinges on your window frames to ensure they can shut properly.
Broken Spindle
It is often the case that the spindle within the handle breaks, rather than the handle itself. This is especially frequent in uPVC tilt and turn windows. These windows require a handle which acts as a locking mechanism within the window frame. The handle is attached to a central rod which is then activated by a series of mushroom-like locking cams, these lock into window frame keeps. If the dead latch mechanism fails to open when the handle has been turned, it's likely the spindle is damaged. This can be a problem that is frustrating.
Luckily, there are ways to rectify this issue. A professional locksmith will be able to quickly and effectively fix this problem. A good locksmith will be able to disassemble the window's handle using a tool that removes the wheel from the area that houses the spindle. This is done without damaging the handle or causing any other damage to the frame of the window.
Once the wheel has been removed the technician can then examine the spindle to determine what has caused it to break. This involves breaking the spindle into its individual parts and carefully recording their general condition as in addition to any specific areas of wear or damage. This process is usually carried out by technicians in a clean and safe environment.
The next step is to clean the damaged spindle. This will help remove any debris or dirt that might be preventing it from functioning normally. The spindle may then be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is similar in size to the original. He will then drill matching holes into both pieces. This ensures that the new spindle is an exact fit with the handle.
If the damaged spindle can't be repaired it may require replacement. Home centers sell generic replacements but if the style of your window is rare then it is necessary to find a woodworker or cabinet maker who can duplicate the exact part for you. Once the new spindle is installed, it can be attached to the handle by line up the screw holes on the handle with the frame's existing screws. Once the handle is securely in place, you can use your uPVC windows.